Sep 20, 2011

KLR Nerf Bars

I saw this KLR650 today that has Nerf Bars protecting the bodywork. I have always wondered why people use these things. They seem to be designed to protect the bodywork.



My own opinion is that the bodywork doesn't need to be protected. After my accident on the 401 where the bike slid on its left side, there was no damage to any bodywork at all. Besides, these bikes won't win any beauty contests and can take a scratch or two.

The only thing that might be critical to protect is the radiator. There is a simple add-on from companies such as Happy Trail that is much smaller and lighter that will protect the radiator. I have this bar on my own KLR and it is good peace of mind



This bike had very mild dual sport tires on it. His tires and the extra weight of the Nerf Bars make it much more likely that he will need those protective bars one day.

My recommendation for this owner would be to save the weight and money and get some KiLleR tires such as aggressive Dunlop D606. These tires, along with a minimalist travel style will help ensure he never crashes his bike.

Sep 12, 2011

Nissan Juke Advert

Check out this awful new ad for the Nissan Juke car:

Nissan Juke

I wrote to the ad company to express my displeasure. I also wrote to Nissan to tell them I won't be buying a Nissan.

Nissan can be contacted here.

Aug 31, 2011

My First Motorcycle Movie

I still really enjoy watching my first moto movie:




Aug 26, 2011

ST1100 Travels

I've made two trips to the Maritime provinces with the ST so far this year. Amazingly, I didn't need long underwear on either trip. It can get cold in eastern Quebec and northern New Brunswick.

I did use some heat, though. Both times, I retained the summer weight gloves. This meant I could use my defective new Gerbing heated liner. You may recall that the glove output plugs on this garment don't work. But the rest of it works, including the heat controller, which is invaluable for maintaining just the right temperature.

My left side grip heater also quit working in the fall at the same time the glove plugs quit. That was a very cold ride at minus 4 Celsius.

On this year's long rides, I brought along my trusty 11 year old Gerbing which has working glove plugs - just in case. The only problem with using the old Gerbing is it uses older SAE dual prong power inputs, which my heat controller does not work with. So it is either full on or completely off. A pain, but warm when you need it.

Which brings me to today's work. I replaced the defective left side grip heater. Still not necessary in southern Ontario, but *cringe* the fall riding season is coming. Here is a pic of the new one going on.




Whenever the local dealer gets my replacement wires, I will repair my new Gerbing heated jacket liner glove plugs.

Here is a pic from Halifax. There doesn't seem to be any more "Welcome To Halifax" signs anywhere. If you know of one, please let me know!



and another, dualsporting with a touring bike...



OK, just one more. This is the excellent seafood at the Bel Air Takeout and Restaurant in Cap-Pele, New Brunswick. Highly recommended.

Jul 1, 2011

New Tires And Canada Day

I love getting new tires. The KiLleR gets two new pairs of shoes today. They are the Continental TKC80 that I have heard about on ADVRider. I ride dirt often and am looking forward to seeing how they run on dirt AND street.


The ST gets a new rear tire after suffering two nails in it last week on the way to the Cheektowaga checkpoint of the Iron Butt Rally. It is, as always, the excellent Bridgestone Exedra G548. (The front is a G547)


Happy Canada Day!

Jun 27, 2011

Iron Butt Rally Checkpoint

The 2011 Iron Butt Rally is now running. The rally started in Seattle, and the first checkpoint was Friday June 24th in Cheektowaga near Buffalo, NY.

I had been planning to go as it is three hours from my house. The day before departure, I heard through the mailing list for previous Iron Butt Rally finishers that a 1200RT rider was in need of a fuel pump controller module.

I asked my friend, a one time BMW tech and RT owner if he had a spare module. He had one and lent it to me.

I was all set to leave, including a full tank and fuel cell and was on the highway when I noticed my ST1100 had a vibration through the chassis. I took the next exit and in the pouring rain checked the tires for nails. I saw two nails in the rear tire. Here is one of them:




I went to a dealer who had no tire to fix it. After some calling around, it was obvious the ST wasn't going too far. I had a previous experience with a damaged tire from plugging a nail hole, and I will avoid that again if I can. Two holes is even worse.

So I came back home and rigged up my GPS on the Suzuki Burgman and carried on. Great machine and very smooth. Here I am with Jeramy Loveall at the checkpoint helping him fix his bike:




It was great seeing all my Iron Butt friends, and witnessing the scene at the checkpoint. I am now back home and it is tire time in my garage. I took the ST rear tire off to replace it, and the rear tire on the KLR is also due for replacement.

So here is a pic of both bikes down for the count:



Jun 16, 2011

Article

Here is an article about me that came out today in the Halifax Chronicle Herald:

Click here to read the article entitled 'Going the Distance.'

May 25, 2011

Wildlife

Out riding (and very much enjoying) the ST1100 today. When I came home, Big Bird was standing in the driveway. I didn't see snuffleupagus, but then again, who ever does? :)




May 23, 2011

ST1100 Rolls Again

"There is no passion to be found playing small - in settling for a life that is less than the one you are capable of living.", Nelson Mandela


My ST1100, loyal traveling companion of many many trips, is finally ready to roll. This round of repairs saw the bike with so many parts stripped away that it was almost unrecognizable as a motorcycle.


I had to raise the rear wheel as high as I could so that I could use the large torque wrench on the two lower bolts holding the new differential on



The most difficult nut to reach and torque is the upper left one. Would have been impossible with the fuel tank in place.



Torqueing the bottom bolts.



Removing the old copper exhaust seals in preparation for the "new" exhaust system.



I had to remove the protective tipover framework on the right side. One bolt was rusted in and it broke. I drilled it out and retapped the hole.



I really needed speedclips to put all the bodywork back on. I was missing quite a few.



Running the bike outside to check for exhaust leaks. Everything was OK.



I have a working fuel guage again. Old one would show full right after the bike was filled, then fall to empty after a short distance. Was a bit of a panic the first time I noticed it.



So that is it, ready for the road. Let's hope the weather improves!

May 16, 2011

Work progresses on the ST1100

Spent some time recently working on putting the ST1100 together. I would like to use it this weekend so I need to hustle. I put the new-to-me differential on the swingarm, I replaced the fuel sender, and I put the new spline on the rear wheel.

Here is the new fuel sender installed on the side of the fuel tank.



Here is the inside guts of the old fuel sender. A winding was broken near one end. I moved the wire slightly to make it easier to see. The fuel reading would drop to zero about 50 km into a tank.



Here is my "new" differential on the bike. Shop manual calls for mounting and torqueing everything with the wheel first, then torqueing the four differential mounting bolts last. The old differential is on the floor.



Here is a photo of the old wheel splines and the new ones. The spline should be flat-topped and wide. The old ones are worn to sharp points.

May 5, 2011

ST1100 Work

Work on the ST1100 is slow due to other projects going on. Here is a photo of the bike.



The rear differential, exhaust system, and fuel tank are all off the bike. Looks bad, but I have seen it like this on numerous occasions before.

I needed tools and additional parts to tackle this job, but I have everything in place now.

May 4, 2011

Going to vote on the KLR650 on election day.

Mar 12, 2011

ST1100 Mileage - More Parts Required

The mileage rolls on. Nearly 460,000 kms in fact. It is not without a few aches and pains along the way.

Take for example the latest list of parts my bike requires. The following photo shows the queue of waiting parts.




In the above photo, you can see an entire exhaust system, a rear differential, a wheel spline, and a fuel sender.

As detailed in these posts, my bike's exhaust system
and rear drive splines are shot:

http://www.silliker.ca/2010/08/st1100-problems-surface.html

and

http://www.silliker.ca/2010/10/st1100-rolls-again.html



My winter maintenance has turned into a repair job. The bike is coming apart. The exhaust system came from Montana, and the rear differential came from New York City. The fuel sender from Forest City Honda right here in town. This will be my third exhaust system and my third fuel sender. Damned unreliable Honda parts, eh?

Here are two pics I took the last time I changed out the exhaust:


New-to-me system is on the left.



The hole is my bike's original exhaust system can be seen
on the bottom.



I will attempt to get a close up shot of my worn splines, and the nice splines on my replacement parts in order to show the difference.

Feb 9, 2011

KLR Troubles

The 2002 KLR650 seems to be having troubles these days. Sounds familiar. In hopes of having some winter fun with it, I brought it to Inglis Cycle Centre in London, Ontario, to have it re-jetted. It was difficult to start in the cold and was hoping to get it set up a little better.

Well as it turns out, the KLR is hard to start for another reason. The intake valves are worn so much the area that comes into contact with the seat is worn to a sharp point. The valve now raises high enough that there is no clearance between the shims and the camshaft, and the seat is compromised so much that there is not adequate compression.

If this had been the exhaust side, it probably would have burned.

The exhaust system is also rusted. The muffler is so rusted it is beyond saving.

The solution is new valve hardware and a new muffler. Since I am in this far, I will also be replacing the rings and possibly the piston itself. The crosshatch is still visible on the cylinder walls so there is hope the piston can be re-used, but the rings will be refreshed with new.

The cylinder head is in good shape. No work required on this piece at all, thankfully.

After doing the doohickey and installing grease nipples in the rear suspension, I am inclined to keep this bike running. The bike has only 55,000 kms on the clock, but has worked hard. It has taken me to some cool places, and will do so again.

Perhaps the ice studs will go onto the Yamaha XT225 instead...

Nov 15, 2010

Gerbing Heated Jacket Liner

On a recent cold weather ride in Northern Ontario, I suffered serious failures on my one year old Gerbing jacket liner. Temperatures were several degrees below the freezing mark.

First problem occurred when putting my Aerostich jacket on. I was holding on to the right side glove connector to guide it through the sleeve opening, and it came right off in my hand. The wire separated from the connector right at the molding. No chance to resolder.

The heated hand grips were still working but it was cold enough to make the back of my hands cold on this long highway ride in the early hours of the morning.

Then the left heated glove stopped working. The wire inside the insulation broke at the molding, but did not completely come off. In the picture, it may not be obvious, but the wire is bent over at an odd angle. Now both hands were cold. The heated hand grips just can't keep up when riding on the highway at -4C for a number of hours.



Then the left heated hand grip stopped working - broken wire. Quite unusual. I would expect more troubles with the right side, where the wires flex with each application of the throttle.

The heated grips had been preventing the onset of frostbite, but just barely. Now my left hand was without any heat at all. It wasn't long before my fingers were painful and stiff. I took my left hand off the the handlebar and placed it between me and the tankbag, out of the wind blast. It helped some, but my hand was still uncomfortably cold. The right wasn't much better. My legs were cold and there wasn't much heat under the liner either. There was just my jacket's shell between the heated liner and the frozen air. I had been shivering for some time.

I pulled over at a Tim Hortons to warm up. Once stopped, I picked out my heated pant liner and heated socks. I needed to get my core temperature up or the ride was done. Once inside, I ordered a chili and hot chocolate. It was around three in the morning with many hours of cold riding before the sun rose.

I put on the heated pant liner and heated socks, which plugged into the bottom of the heated jacket liner. I then put a sweater on top of the liner in hopes of keeping some of the heat in. After finishing my food, I went back at it.

No sense plugging in the heated gloves anymore. Off I go with my single heated grip and heated gear running. I felt better but the left hand suffered. I had to ride with it tucked behind the tankbag or risk frostbite.

I rode like this for hours. Eventually, the sun came up and temperatures inched above the freezing mark. The pain went away, but the cold never did.

By that day's nightfall, I was in warmer air south of Georgian Bay and it wasn't as cold. I was mad as hell, however, to be the victim of an early failure of a brand I once trusted.

My old Gerbing served me for over ten years, without a single problem for at least six of those years. After serving me valiantly for so long, it did eventually begin to suffer broken wires. I fixed them all myself, even though Gerbing offers a lifetime warranty on the wiring to the original owner.

A warranty isn't much good when one is freezing one's ass off in the middle of the night. I would rather fix a problem myself rather than mail it back to the United States, wait a few months, then pay outrageous brokerage fees upon return of the garment because they ignored my request to return via post instead of the hyper-expensive courier companies. (That subject being a whole other lengthy post)

And I can't do without a heated liner for months, summer or winter.

But after being stranded in the cold one too many times, I invested in another Gerbing. Big mistake. The new ones are now made in China and are of poor quality.

Others issues have irked me about the new designs. The jacket heat circuit and the glove heat circuit are now separate, forcing a purchase of a dual controller, or a splitter to run both circuits from one controller. Not a good idea from the standpoint of having more connections, which equates to more potential trouble spots.



Well guess what? I had problems with this splitter circuit within weeks of buying the jacket liner - right before the Iron Butt Rally. The heated jacket liner quit working while the gloves continued to provide heat. This problem was quite obviously the fault of the splitter. Sure enough, moving the connections caused the problem to move also, following the bad leg of the splitter.

I returned the splitter to the dealer where it was bought. It was returned to me from the distributor with an explanation that it was not faulty, and that I should send my jacket liner back to the company. Well I tried it again, thinking they may have just given me a new one.

Nope, they gave me the same crappy splitter with one branch providing no power. I had to purchase another (overpriced) splitter and THROW OUT the original one which was only weeks old. As I suspected when I saw this new design, there are now more things with which to have trouble.

So all in all, I give Gerbings a failing grade. I will send the "new" liner for warranty, but I can never rely on it again. It will ride along as a backup set to my next heated clothing gear - appropriately called "Gears."

http://www.gearscanada.com/index.html

Made in Canada, this gear got a positive review from a friend. I shall be obtaining a liner and gloves shortly. Review to follow in the new year.

Oct 16, 2010

ST1100 Rolls Again

The ST1100 is once again rolling. In lieu of a new exhaust system - which I have waiting in the wings for a winter change-out - I have patched the exhaust system.

I first tried red exhaust tape which melts and molds to fill cracks. My complete break being so much more than that, it wouldn't hold the canister - which is only supported by one bolt - from moving and was totally inadequate. So I applied a solution that is often effective in mobile applications: I wired it.



Nope, still moving too much, and now the red tape was bulging out through the wire when the bike was running. Next step was heavy duty aluminum foil with stainless steel band clamps. Well wouldn't ya know, the thing is holding. Ugly as sin is this back-alley repair but it is doing the trick. I have been running the bike this way for weeks and it is holding.



Should get me through the meagre fall riding that remains.

Aug 14, 2010

ST1100 Problems Surface

Well the miles I am accumulating on the 1998 Honda ST1100 are once again showing themselves. The splines in the rear drive are worn, and the exhaust system is coming apart.

The splines on both the differential side and the wheel side are worn from the nice flat top profile one would expect to small points. There is not much life left in them. I recently traveled to New York City to obtain a replacement. I bought a used differential from my friend Dan who is parting out an ST1100. I had recently bought the exhaust system and a brake caliper off this machine. How did I get there? Why on the ST1100 of course!

I was doing a tire change on the bike when it was noticed. I did get the new tire on, lubricated those worn splines with moly grease and rode to NYC and back. Approximately 1000 km each way. Of course the new tire is my old standby, the excellent Bridgestone Exedra G548.

I have yet to put the new-to-me differential on the bike.

The other problem I have is with that previously mentioned exhaust system that I bought used from the donor motorcycle. The pipe leading to the right canister is completely separated from the collector. Of course this used system was put on after the original exhaust rusted out.

I must get this system repaired soon. It is my favourite commuter bike!


Here is a photo of the damaged exhaust.

Jun 27, 2010

Annual Maintenance Complete (Whew!)

It feels good when all the maintenance on the motorcycles is up to date.

I just completed a round of maintenance on the KLR650 and the ST1100. Here is what I did.

KLR650

  • fork oil
  • flush front and rear brake fluid
  • flush and fill radiator
  • motor oil and filter
  • clean foam air filter and re-oil
  • new spark plug
  • sonic wash and completely overhaul the carburetor
  • remove coolant overflow tank, clean and refill
(and that's besides doing the doohickey inside the engine and installing
grease nipples on the rear suspension)



ST1100
  • fork oil
  • replace blown headlight bulb
  • flush and fill radiator
  • remove, clean, and refill coolant overflow bottle
  • flush front and rear brake lines with new fluid
  • replace differential fluid
  • clean and re-grease speedometer cable core
  • flush clutch line with new fluid
  • engine oil and filter
  • carburetor synchronization
  • valve clearance check
  • (plugs, filters, clutch, timing belt, and water pump were new last year)


I also did some maintenance on Jane's Yamaha XT225

  • flush front brake line with new fluid
  • engine oil and filter
  • Clean and re-oil air filter
  • Apply grease to all the rear suspension grease fittings
  • replace leaking base gasket between cylinder and engine block


We should be ready for our excursion to James Bay in Northern Quebec in a week.

Jun 1, 2010

First Long Ride of 2010

It was the middle of May, 2010, and I managed to get away for the first long ride of 2010.

It was mostly cold and rainy on my way from London, Ontario, to Moncton, New Brunswick.

In fact, it was cold most of the time I was there, and rainy.

Miserable.

I did experience a few nice days in my week and a half in the Maritimes. Here is a photo from my ride to Prince Edward Island. My first attempt at riding there on this trip was canceled due to severe rain.



I was also in the beautiful city of Halifax, Nova Scotia. Overall a wonderful trip.

May 2, 2010

The KLR650 Is Alive And Well

It has been a long road. From the point where the suspension seized up until the motorcycle is again fully functional is a span of a year and a half.

So what was the holdup? I wanted to install six grease nipples on the rear suspension, and didn't know how I was going to get that done. In fact, for a while, I was considering a seventh and difficult location to install a grease nipple: on the head of the shock linkage pivot bolt.

I finally got those grease fittings installed earlier this year, abandoning the seventh. Thanks for doing this, Bruce. Also, since the engine was out of the frame, I opened up the engine to replace the balancer chain tensioner - the infamous doohickey.

Having taken some time off work to devote to this project, it finally progressed - sort of. Sometimes it was one step forward and two steps back.

I got the subframe on - a fiddly job that requires attaching a stiff rubber hose from the airbox to the carb. Then I had to remove it again in order to install the exhaust system. Then I had to remove the exhaust system in order to attach the negative battery cable to the starter. Of course, removing the exhaust system meant also removing the subframe - again!

Then after getting the bike mostly together, I discover that the initial problem which precipitated this entire process still existed. The rear suspension was still acting as if it was seized. One problem was the left linkage arm was installed the wrong way to allow clearance between the bolt head and the drive chain.

But after taking things apart to correct that issue, the suspension was still seized. I could press the seat down and it would stay down. I could pull the seat up, and it would stay up. What was wrong?

I once again disassembled the rear suspension (was this the third time or the fourth, I can't remember!) to remove the shock and check everything out. With the help of Gord Inglis of Inglis Cycle Centre in London, we put the shock on the hydraulic press and it did seem to rebound.

However, another check of the suspension eliminated all other possibilities. I enlisted Gord to help me find an aftermarket shock for the bike. Aftermarket shocks have the advantage of being rebuildable down the road when the damping system inevitably becomes less effective.



In the case of the original shock, instead of losing all damping whatsoever and turning the back end into a pogo stick, the internals of the Kawasaki shock went the other way; the shock became slow and stiff to extend and rebound as if filled with molasses.



Now, with my new Progressive Suspension shock in place, the bike rides as it should. Things have settled down in the back and the bike rides much smoother.

Upon initial disassembly of the bike way back when and finding the shock linkage pivot bolt rusted and seized, I looked no further for any other possible causes with regards to the seized suspension. Obviously, there were more than one problem with the bike!

Once again, thanks Gord for helping me out.

Today, my wife and I went out for an extended dirt ride to check things out and have a bit of fun. It was an excellent ride. We racked up more than 200 km, the vast majority on dirt and gravel backroads. There were also several old no-longer-maintained roads which required elevated care to the point of standing up at times.

Here are some pics.


Jane and her Yamaha XT225 - and the "new" KLR650





Port Stanley, Ontario - on the north shore of Lake Erie



Yellowstone Park! (see the sign in the background)